HDT 0300 RD 48A

3M™ Heat Shrink Tubing HDT Heavy-Duty, Polyolefin Data Sheet November 2018 Description 3M™ Heat Shrink Tubing HDT is designed to provide reliable performance as well as excellent mechanical and environmental protection. This flame-retardant product combines the important advantage of easy handling and installation with maximum operating reliability and system protection. The tubing comes with a factory-applied sealant. This sealant is a heat-activated thermoplastic material that remains soft and flexible over long periods under adverse environmental conditions. During heating the sealant softens, bonds to underlying surfaces and fills small voids that might be present. When cool, the sealant forms a barrier against water, moisture, dirt and other environmental contaminants. Heavy-duty tubing is fabricated from specially formulated cross-linked polyolefin, assuring long-term environmental protection. The tubing is also highly chemical, abrasive and split resistant. The tubing is rated for continuous operation at -55ºC (-67ºF) to 110ºC (230ºF). Minimum shrink temperature is 121ºC (250ºF). Uncoated product (without sealant) is available on special order. Agency Approvals & Self Certifications Meets the requirements of: AS23053/15, Class 1* For RoHS and REACH information, please visit www.3M.com/regs *Formerly MIL-I-23053/15, MIL-DTL-23053/15 and SAE-AMS-DTL-23053/15 Standard Sizes and Dimensions (without adhesive) 3M Part Number Cable Range Expanded I.D. (Minimum) in. (mm) HDT-0300-48A #14 - #8 AWG .30 (7,62) .10 (2,5) Recovered Outer Wall Thickness (Nominal) in. (mm) .08 (2,0) HDT-0400-48A #12 - #6 AWG .40 (10,2) .15 (3,8) .09 (2,3) HDT-0800-48A #8 - 1/0 AWG .80 (20,3) .20 (5,1) HDT-1100-48A #2 – 4/0 AWG 1.10 (27,9) Recovered I.D. (Minimum) in. (mm) Length in. Std. Pkg. Pieces/ Carton Color 48 20 Red and Black 48 20 Red and Black .11 (2,8) 48 20 Red and Black .37 (9,4) .12 (3,0) 48 20 Red and Black HDT-1500-48A 3/0 – 400 MCM 1.50 (38,1) .50 (12,7) .17 (4,3) 48 20 Black Only HDT-2000-48A 250 – 750 MCM 2.00 (50,8) .65 (16,5) .17 (4,3) 48 10 Black Only HDT-3000-48A 600 – 1250 MCM 3.00 (76,2) 1.00 (25,4) .17 (4,3) 48 10 Black Only HDT-4500-48A 1500 – 2500 MCM 4.50 (114,3) 1.50 (38,1) .17 (4,3) 48 5 Black Only HDT-6000-48A 2.1” – 4.8” O.D. 6.00 (152,4) 1.80 (45,7) .17 (4,3) 48 5 Black Only HDT-7000-48A 2.5” – 5.6” O.D. 7.00 (177,8) 2.00 (50,8) .17 (4,3) 48 5 Black Only 1 of 3  3M™ Heat Shrink Tubing HDT Shrink Ratio 3M™ Heat Shrink Tubing HDT has a 3:1 shrink ratio. When freely recovered, the tubing will be 33.3% of its as supplied diameter. The recovered wall thickness is proportionate to the degree of recovery. Applications Can be used as cable sleeve, flame retardant, polyolefin for 1 kV or other long term environmental protection – highly chemical, abrasion and split resistant Typical Properties Not for specifications. Values are typical, not to be considered minimum or maximum. Properties measured at room temperature 73°F (23°C) unless otherwise stated. Physical Properties Typical Value US units (metric) Tensile Strength 2400 psi Ultimate Elongation 475% Longitudinal Change +1, -10% Secant Modulus 14,000 psi Specific Gravity 1.28 *Heat Aging 7 Days @ 175ºC (347ºF) Elongation 225% *Heat Shock 4 hrs @ 225ºC (437ºF) No dripping, cracking, flowing *Low Temperature Flexibility 4 hrs. @ -55ºC (-67ºF) No cracking Flammability Self-extinguish *Outer wall only. Electrical Properties Typical Value US units (metric) Dielectric Strength 500 V/mil (60 mils) Volume Resistivity 1014 ohm-cm Chemical Properties Typical Value US units (metric) Corrosion Effect Non-corrosive Solvent Resistance Tensile Strength Dielectric Strength 1500 psi 200 v/mil Water Absorption 0.02% Fungus Resistance Non-nutrient 2 of 3 3M™ Heat Shrink Tubing HDT Shelf Life & Storage 3M™ Heat Shrink Tubing HDT has a 10-year shelf life from date of manufacture when stored in a humidity controlled storage (10°C/50°F to 27°C/80°F and